The source section allows you to select the input signal connection type, and related settings.
When you have an AtomX SDI module attached to your NINJA V, you will be able to tap on Input to switch between HDMI and SDI inputs. For more information refer to the Mode section.
The resolution and frame rate of the selected input source is displayed. No Input will be displayed when there is no input connected.
When connected to an HDMI source, tap on HDMI Standard to toggle between the following:
HDMI 2.0 and
Compatibility Mode (HDMI)
This mode improves the signal locking process when working with HDMI signals from specific cameras. After selecting compatibility mode, remove and re-insert the HDMI cable to the camera.
Compatibility mode should be enabled when recording from a Z CAM E2 series camera via HDMI, for all frame rates and resolutions in ProRes, DNx and ProRes RAW. It should also be enabled when recording video from a Canon 1DX MIII via HDMI, in 4Kp50 and 4Kp60 modes in ProRes and DNx.
Compatibility mode for HDMI should not be used for any HDMI RAW signals except for Z CAM E2 series cameras and the Canon EOS R5.