In the VIDEO OUT section of the Output menu page, the SDI module will automatically detect the resolution and frame rate of the SDI input when connected. The NINJA V+ detects the active input Channel Source and configures the other connector as an Output.
SDI 3G Type
Allows you to specify the ‘SDI 3G Type’ for compatibility with equipment that expects a specific type of 3G-SDI video. Tap to cycle through the options:
Level B or
You can only output SDI when the INPUT is in ‘SINGLE’ or ‘AUTO SELECT’ mode.
SDI Compatibility Mode
Some video devices use a slightly different version of the 12G standard, which can cause issues with their ability to detect a video signal that is output from an ATOMOS device. Enabling SDI Compatibility Mode will cause your NINJA V+ to send out a video signal in the format that these devices expect. Tap the switch to toggle between On and Off.