AtomX expansion modules attach to the AtomXpansion port on your NINJA V, and provide additional connections and functionality.
AtomX SDI Expansion Module
The AtomX SDI Expansion Module (A) adds the quality and convenience of SDI connectivity to your NINJA V, which allows you to monitor and record SDI video up to 4Kp60 from a range of professional cameras and video sources. The two BNC connectors (B) allow for input and output connections, so you can send video to or receive video from any SDI device. This provides flexibility for any video or film production to allow all crew including directors, cinematographers, assistants and focus pullers to monitor and replay identical and calibrated content in HDR at the same time.
To use the AtomX SDI Module with your NINJA V, firmware version 10.1 or later needs to be installed.
The AtomX SDI Expansion Module also allows you to cross convert signals between HDMI and SDI. This means that where HDMI sources are connected to your NINJA V, an SDI signal can be output from both of the BNC connectors on your AtomX SDI Expansion Module. Where an SDI video signal is connected to your AtomX SDI Expansion module, you can output an HDMI signal over the HDMI Out connector on your NINJA V. Cross conversion happens automatically, and does not need to be enabled. For more information on cross conversion refer to When an AtomX SDI Expansion module or ATOMOS CONNECT is attached to your NINJA V, you can cross convert signals between HDMI and SDI. .
For more information or to purchase an AtomX SDI Module, visit atomos.com/accessories/atomx-sdi
To use the cross conversion feature, firmware version 10.6 or later needs to be installed on your NINJA V.
You can add the SDI RAW feature to your NINJA V by purchasing the optional SDI RAW upgrade at my.atomos.com
After activating the feature on your NINJA V, you can use the AtomX SDI Expansion module to record RAW over SDI from compatible cameras. Refer to Activation section for more information on the activation process.
To use the AtomX SDI Module for SDI RAW, firmware version 10.6 or later needs to be installed on your NINJA V.
When RAW over SDI is enabled on a connected camera, your NINJA V will automatically detect the RAW signal and prompt you to select ProRes RAW as the recording codec.
AtomX SYNC Expansion Module
The AtomX SYNC Expansion Module (C) adds professional wireless timecode and sync to any HDMI camera or source, making it easy to integrate consumer cameras into multicam productions. This allows for perfect synchronization with a range of other products including iOS devices, professional audio recorders and cameras. The ATOMOS UltraSync ONE and UltraSync Blue can also be used to bring multiple cameras and devices into perfect sync.
The result is that your footage and audio from multiple sources will be perfectly aligned when you bring it into your NLE timeline. You can sync and/or control any number of NINJA V units equipped with AtomX Sync modules on the same network at ranges of 200m+. AtomX Sync also has a built-in battery extender that allows for continuous power when swapping batteries, ensuring uninterrupted operation of the NINJA V during a shoot.
For more information or to purchase an AtomX SYNC visit atomos.com/accessories/atomx-sync
To use the AtomX SYNC Module with your NINJA V, firmware version 10.4 or later needs to be installed.
The AtomX CAST (D) is a modular companion that transforms the NINJA V into a 4 input HDMI switcher. The combination of the NINJA V and AtomX CAST becomes the Ninja CAST, a fully functional stand-alone switcher with an integrated high quality 5” HDR touchscreen monitor with multi-view, broadcast quality recording and physical buttons - that can be used anywhere and does not require a computer to function. The flexible control options allow you to use either the touchscreen or the physical buttons to 'switch' between sources when deciding what should be on screen at any one time for broadcast.
Ninja CAST appears as a high-quality webcam to your computer, and it works immediately with your video applications like Zoom, Teams and Skype without the need to install drivers on the computer. Create broadcast quality multicamera programs and use features like logos, graphics and picture in picture to enhance your online meetings, presentations, conferences, remote learning/training, virtual conferences or demonstrations.
To purchase an AtomX CAST visit atomos.com/accessories/atomxcast
To use AtomX CAST with your NINJA V, firmware version 10.71 or later needs to be installed.