When the Atomos CONNECT accessory is attached to your NINJA V and the device is in Connect Mode, you can access settings on the Wi-Fi menu tab. This menu provides settings for connecting your device to a Wi-Fi network, so that you can connect to Atomos Cloud Services. For more information on Connect Mode refer to the CONNECT MODE section.
An Atomos CONNECT must be attached to your NINJA V and the device must be in Connect mode before the Wi-Fi Menu page appears in the menu system.
How to connect to a Wi-Fi network:
Navigate to the Wi-Fi Menu page on your NINJA V.
Tap the toggle switch at Wi-Fi to enable Wi-Fi.
The WiFi on/off status is saved on reboot
The network name (SSID) of the available Wi-Fi networks will be displayed at Available Networks, along with the signal strength for each network and a padlock icon where a password is required to join the network. Tap and drag the list to scroll through the listed networks.
Tap on one of the network names to select it. A Join Network box will appear with the SSID, the security type and a field for the password. Tap on the password field to enter the password for the selected network.
A keyboard will appear so that you can enter the password for the selected network. Enter the password for the network and tap on Ok. Tap on the Eye icon in the password field to toggle the visibility of the password on and off.
You will now be connected to the chosen Wi-Fi network, and a green tick will appear next to the network name. The MAC address will also be listed.
Now that you are connected to a network, the Connect Menu page will be updated with a green circle and the word 'Connected' at Network. Refer to the CONNECT MODE section for information on connecting to the Atomos Cloud.
It may take up to 10 seconds for Wi-Fi connections to be re-established when switching between record and playback mode.
When toggling Wi-Fi on and off, the On/Off toggle may not be immediately responsive. A dialogue message may suggest a system reboot to fix the issue.