At the top of the NINJA V screen is the area referred to as the Information Bar.
It displays the settings of your input device/camera, current settings of your NINJA V, media, audio, disk capacity and more. Touching any of these areas will take you to the relevant menu and allow you to make changes to your setup.
Alternatively you can access these setting by tapping the Record Settings icon. Tapping the Settings button will open the Record Settings menu, from where you will be able to navigate to the required tab. Swipe left to see more tabs.
The content in the Information Bar is dependent on what mode you are in, for example Recording and Monitoring will display the Video Input type, but if you are in Play mode, Video Input will show the resolution and frame rate of the video clip currently cued or playing.
Monitor Mode / Features
In the image the NINJA V has an input and an output, and is ready to record the signal or play the last recorded file from disk.
VIDEO INPUT: (Rec & Mon mode) Resolution and frame rate from input device
VIDEO INPUT: (Play & Edit mode) Resolution and frame rate of current playback clip
INPUT GAMMA: Displays the current input gamma. Tap to open Input menu to ensure it matches the output coming from your camera or other input device. RAW inputs will automatically be set to match the camera output. For some cameras further options can be selected. During playback mode this setting will be determined by the metadata of the recorded content.
VIDEO OUTPUT: This menu displays the active video resolution and frame rate being output from the HDMI Out.
MONITORING MODE: Displays the monitoring display mode that has been selected. Native, Rec709, HLG, PQ or the name of the 3D LUT selected. Touch to change settings.
CODEC (RECORDING FORMAT): Shows the recording format. Touch to change settings.
METERS: (Audio Meters): Touching the audio meters will open the Audio Menu.
MEDIA INFO: This shows the remaining recording time based on the chosen codec and remaining capacity of the drive.
BATTERY: Touch to access Power Menu. Battery Indicator shows power level and flashes red when power is running low.
When you are in Connect mode, the following network status icons will appear in the Information Bar. These icons represent Wi-Fi and Ethernet connections, and will appear white when active.
SETTINGS (yellow): Touch to access Monitoring Feature settings.
Touch MON again to return to previous screen.
The EDIT button works in a similar fashion to the Mon button, as it is not possible to have Monitor and Edit active simultaneously.